Femto Vacuum PSVAD, Pressure range: -1 to 0 Bar vented gauge, LED display (red), 1 x PNP switch output, switch and switch-back level programmable with teach-in function. Analog output 1-5V
This is model 1-05-0201-053100, Femto, -1...0 bar, G1/8", M8-4p, 1xPNP, 1x(1-5V)
Pressure and vacuum sensor with transistor switching output and additional analog output
Multi-talented
The FEMTO has both an adjustable transistor switching output (loadable with 250 mA) and an analog output.
The sensor can thus control actuators directly or indirectly and at the same time give out an analog measured value proportional to the applied pressure/vacuum.
Pneumatic range
Thanks to its design and the equipment with a transistor switching output and an analog output,
the FEMTO is ideally suited for applications in the pneumatic field.
| Type: | With digital display |
| Measuring range: | -1...0 bar, -1...10 bar |
| Output: | 1x switching signal (PNP), Analog Output 1-5 V |
| Output current: | max. 250 mA per output |
| Output function: | NO / NC (programmable) |
| Switching frequency: | 250 Hz |
| Response time: | < 2,5ms |
| Accuracy: | ± 0,5% FS |
| Repeatability: | ± 0,2% FS |
| Process connection: | G1/8" external thread, NPT1/8" external thread |
| Material (process connection): | Brass nickel-plated |
| Electrical connection: | M8 4-pole |
| Operating voltage: | 11...30 VDC |
| Current consumption: | < 30 mA |
| Short-circuit / reverse polarity protection: | yes / yes |
| Material (housing): | Plastic PC |
| Protection class: | IP65 |
| Operating medium: | Filtered, dry or oiled air and non-corrosive gases |
| Weight: | 20 g |
Several variants of this model with different measurement ranges are available. Contact us for availability.
Check It ! Maybe you need this too ...
